Stationary concrete mixer is a kind of multi-function mixing machinery, it was used because its own features of light weight, high efficiency, good mixing quality, simple structure, convenient operation and so on. However, operators ignore the daily maintenance link just because its simple operation features, then, causing something happens. Therefore, the daily maintenance of concrete mixer is very important. These knowledge of concrete mixer daily maintenance are as below:
- keep the mixer clean, remove the dirt and obstacles of it.
- Check the oil and electric circuit and control equipment of the lubrication department, and fill in the lubricating oil as required.
- Mixer should implement secondary leakage protection, to go to work before the power is switched on, must be carefully examined, to use it in qualified condition after the empty switch test, safety first!
- Check the transmission clutch and brake is flexible and reliable, the wire rope is not damaged, the track pulley is good, there is no obstacle around and all parts of the lubrication is good, etc.. To take preventive measures.
- Before work, add water in the mixing barrel idling 1 to 2 minutes, and to check the reliability of the clutch and brake device work.
- In the course concrete mixer’s of operation, the key points are to check the noise of the motor, the reducer, the transmission gear, and whether the temperature is too high.
- After starting up, often pay attention to the operation of the mixer components are in normal. In downtime, always check the mixer blade is bending, screw knocked out or loose, safety in production, eliminate hidden dangers.
- After work, clean the concrete mixer seriously.
Please feel free to give your inquiry in the form below. We will reply you in 24 hours. Thanks.
The post Daily Maintenance of Stationary Concrete Mixer appeared first on China Concrete Mixers - Changli Machinery.